ablab

Hello Readers, welcome to my Blog - A Blog For Bloggers By A Blogger. I'm Arun, an entrepreneur Blogger from India.

LED Dancing with ATmega16

10526
1
Mark as Favourite

In this project, we will learn How to play with LEDs using AVR ATmega16 microcontroller. First, we will connect the 8 LEDs with 8 pins of any port of the ATmega16 microcontroller. Then, we will generate different patterns with the 8 LEDs. The LED Dancing project is a combination of LED Blinking, Pattern 1, Pattern 2, Pattern 3, Pattern 4, Pattern 5, Pattern 6, Pattern 7 and Pattern 8 projects.

Softwares Required

Hardwares Required

Name Quantity
AVR Trainer Board-100 with ATmega16 1pc
AVR USB Programmer 1pc
12V, 1A DC SMPS Adaptor 1pc
10 to 10 FRC Female to Female Connector 2pc

Circuit Diagram

Video

Connection Guide

The step-by-step connection guide for LED Dancing with ATmega16 is as follows

  • Steps - 1 ( 0f 6 )

    Insert the DC Pin of 12V, 1A DC Adapter to the DC Socket of AVR Trainer Board-100.

  • Steps - 2 ( 0f 6 )

    Connect PortB header with LED header in AVR Trainer Board-100 with a 10 to 10 FRC Female Connector.

  • Steps - 3 ( 0f 6 )

    Connect the ISP header of AVR Trainer Board-100 with AVR USB Programmer header of AVR USB Programmer with a 10 to 10 FRC Female Connector.

  • Steps - 4 ( 0f 6 )

    Connect the AVR USB Programmer to the PC/Laptop's USB Port directly or with the help of USB AM-AF Cable.

  • Steps - 5 ( 0f 6 )

    Switch on the power with the help of Power Switch of AVR Trainer Board-100.

  • Steps - 6 ( 0f 6 )

    Download the LED Dancing with ATmega16 Hex file to AVR Trainer Board-100 with the help of SinaProg Hex downloader and AVR USB Programmer.

  • Insert the DC Pin of 12V, 1A DC Adapter to the DC Socket of AVR Trainer Board-100.

    Steps - 1 ( 0f 6 )

  • Connect PortB header with LED header in AVR Trainer Board-100 with a 10 to 10 FRC Female Connector.

    Steps - 2 ( 0f 6 )

  • Connect the ISP header of AVR Trainer Board-100 with AVR USB Programmer header of AVR USB Programmer with a 10 to 10 FRC Female Connector.

    Steps - 3 ( 0f 6 )

  • Connect the AVR USB Programmer to the PC/Laptop's USB Port directly or with the help of USB AM-AF Cable.

    Steps - 4 ( 0f 6 )

  • Switch on the power with the help of Power Switch of AVR Trainer Board-100.

    Steps - 5 ( 0f 6 )

  • Download the LED Dancing with ATmega16 Hex file to AVR Trainer Board-100 with the help of SinaProg Hex downloader and AVR USB Programmer.

    Steps - 6 ( 0f 6 )

Downloads

LED Dancing with ATmega16 Project File
  • 116 downloads 0 Kb

Post a Comment

    • Prince
      HOW TO BE MAKE "CONVERGING" LED LIGHT BY USING A 8 LED LIGHT. USE OF EMBEDDED CODING IN AT MEGA 16.[table="width: 500"] JUST LIKE I CAN GIVE U "BINARY CODE" OF "8 LED LIGHT" TO MAKE A "embedded PROGRAM" by using a "FOR LOOP" 10000001 01000010 001001001 000101000 000010000 please give fast reply.
      2017-06-10 19:39:21
      Reply
      • Arun Kumar Garg

        Plz send your requirement to info@ablab.in

        2017-07-05 16:28:12
        Reply