LED Blinking with AVR ATmega16 Microcontroller

LED Blinking with ATmega16

62109

Blinking LEDs in Embedded System is like the “Hello World” program of C programming language or any other programming language. In this project, we will learn How to blink LEDs with AVR ATmega16 microcontroller. First, we will connect the 8 LEDs with 8 pins of any port of the ATmega16 microcontroller. Then, we will make all the 8 LEDs to blink with an interval of 500ms. It means, initially we will glow all the 8 LEDs for 500ms and then, we will turn off all the 8 LEDs for 500ms. This process continues forever and in this way LEDs blinks continuously.

Softwares Required

Hardwares Required

Name	Quantity
AVR Trainer Board-100 with ATmega16	1pc
AVR USB Programmer	1pc
12V, 1A DC SMPS Adaptor	1pc
10 to 10 FRC Female to Female Connector	2pc

Circuit Diagram

Video

Connection Guide

The step-by-step connection guide for LED Blinking with ATmega16 is as follows

Steps - 1 ( 0f 6 )

Insert the DC Pin of 12V, 1A DC Adapter to the DC Socket of AVR Trainer Board-100.
Steps - 2 ( 0f 6 )

Connect PortB header with LED header in AVR Trainer Board-100 with a 10 to 10 FRC Female Connector.
Steps - 3 ( 0f 6 )

Connect the ISP header of AVR Trainer Board-100 with AVR USB Programmer header of AVR USB Programmer with a 10 to 10 FRC Female Connector.
Steps - 4 ( 0f 6 )

Connect the AVR USB Programmer to the PC/Laptop's USB Port directly or with the help of USB AM-AF Cable.
Steps - 5 ( 0f 6 )

Switch on the power with the help of Power Switch of AVR Trainer Board-100.
Steps - 6 ( 0f 6 )

Download the LED Blinking with ATmega16 Hex file to AVR Trainer Board-100 with the help of SinaProg Hex downloader and AVR USB Programmer.