Relay and SIM900 GSM/GPRS Modem based SMS Controlled Wireless Home Automation System with Status Reply using ATmega16 Project Kit
Relay and SIM900 GSM/GPRS Modem based SMS Controlled Wireless Home Automation System with Status Reply using ATmega16 Project Kit is a kind of Wireless Home Automation Kit where different home appliances like Bulb, Fan, TV and others are controlled wirelessly from a Mobile. The GSM Modem provides vast-range of wireless control ability to the home automation system unless the system gets out of signal area. The home appliances can be controlled wirelessly from a Mobile by sending predefined set of SMS to the SIM900 GSM/GPRS Modem of the Home Automation System. And all the change in the status of the appliances are displayed in a 16X2 Alphanumeric LCD continuously. The predefined set of SMS to control the home appliances are shown below:-
Control SMS | Home Appliance Status |
A1 ON | Bulb 1 On |
A1 OFF | Bulb 1 Off |
A12ON | Bulb 2 On |
A2 OFF | Bulb 2 Off |
A3 ON | Fan 1 On |
A3 OFF | Fan 1 Off |
A4 ON | Fan 2 On |
A4 OFF | Fan 2 Off |
ALL ON | All Appliances On |
ALL OFF | All Appliances Off |
STATUS | All Appliances Status |
Apart from control SMS, another predefined SMS(called status SMS) can be sent to the SIM900 GSM/GPRS Modem of the Home Automation System to know the currenet status of all the appliances. After sending the status SMS, the SIM900 GSM/GPRS Modem of theHome Automation System will sends back a reply SMS containg the current state of all the appliances.
This Home Automation Kit is built using AVR ATmega16 Microcontroller, Quad Relay Driver, 16X2 Alphanumeric LCD, a Home Appliances Kit(2 Bulbs and 2 fans), and SIM900 GSM/GPRS Modem.
Upon purchase, the buyer will receive a complete working project kit of Relay and SIM900 GSM/GPRS Modem based SMS Controlled Wireless Home Automation System with Status Reply using ATmega16 Project Kit. The ATmega16 Microcontroller of this kit is preprogrammed with the Relay and SIM900 GSM/GPRS Modem based SMS Controlled Wireless Home Automation System with Status Reply using ATmega16 code and all the interconnections are made before shipping the project kit. The package contains following materials:-
Hardwares
- AVR Trainer Board with ATmega16-1pc
- Quad Relay Driver-1pc
- SIM900 GSM/GPRS Modem-1pc
- 16X2 Alphanumeric LCD-1pc
- 1 to 1 Connector-Female to Female-13pc
- 10 to 10 FRC Female to Female Connector-1pc
- Nuts and Bolts
Project Codes, Hex Files, Circuit Diagrams & Connection Guides
- Relay and SIM900 GSM/GPRS Modem based SMS Controlled Wireless Home Automation System with Status Reply using ATmega16
- SIM900 GSM/GPRS Modem Interfacing with ATmega16
- SIM Card Presence Detection in SIM900 GSM/GPRS Modem with ATmega16
- Dialing a Number from SIM900 GSM/GPRS Modem with ATmega16
- Sending SMS from SIM900 GSM/GPRS Modem with ATmega16
- Reading SMS from SIM900 GSM/GPRS Modem with ATmega16
- Deleting SMS from SIM900 GSM/GPRS Modem with ATmega16
- Receiving an Incoming Call in SIM900 GSM/GPRS Modem with ATmega16
- Disconnecting/Hanging an Incoming Call in SIM900 GSM/GPRS Modem with ATmega16
- Disconnecting/Hanging an Ongoing Call in SIM900 GSM/GPRS Modem with ATmega16-I(will receive and disconnect)
- Disconnecting/Hanging an Ongoing Call in SIM900 GSM/GPRS Modem with ATmega16-II(will call and disconnect)
- ATmega16 to PC Communication with LED Display
- PC to ATmega16 Communication with LED Display
- Full Duplex Communication between PC and ATmega16 with LED Display
- ATmega16 to PC Communication with LCD Display
- PC to ATmega16 Communication with LCD Display
- Full Duplex Communication between PC and ATmega16 with LCD Display
- Relay Driving with ATmega16
- 16X2 Alphanumeric LCD Interfacing with ATmega16
- Horizontal Scrolling in 16X2 Alphanumeric LCD with ATmega16
- Vertical Scrolling in 16X2 Alphanumeric LCD with ATmega16
- Buzzer Interfacing with ATmega16
- LED Interfacing with ATmega16
- LED Blinking with ATmega16
- LED Pattern 1 with ATmega16
- LED Pattern 2 with ATmega16
- LED Pattern 3 with ATmega16
- LED Pattern 4 with ATmega16
- LED Pattern 5 with ATmega16
- LED Pattern 6 with ATmega16
- LED Pattern 7 with ATmega16
- LED Pattern 8 with ATmega16
- LED Dancing with ATmega16
Softwares, Installation Guides, User Guides
- Atmel Studio 6
- SinaProg
- RealTerm
- USBasp driver(for Window XP, Vista , 7 and 8)
There are no reviews yet.