Password Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II Project Kit

Password Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II Project Kit is a kind of Secured Wireless Home Automation Kit where different home appliances like Bulb, Fan, TV and others are controlled wirelessly from a PC through 433MHz RF. For controlling different home appliances, here we are using relay.

Before any home appliances can be controlled, a password needs to be entered into the Home Automation system to gain access of appliance control. After the correct password has been entered, the appliances can be controlled else the system keeps asking for the password. The home appliances can be controlled wirelessly by sending predefined characters from a PC through 433MHz RF. Here, we will control 4 appliances, two Bulbs and two Fans. For each home appliances, one character is assigned, each time the key is sent, the appliances changes its status i.e from On to off and from Off to On. Apart from these characters, two more characters are assigned, one to turn-on all appliances at a time and the other to turn-off all appliances at a time. So, all total 6 keys are used to control 4 appliances(Two Bulbs and two Fans). The control characters for 4 appliances are shown below:-

Control Characters Home Appliances Status
1 Bulb 1 Changes Status
2 Bulb 2 Changes Status
3 Fan 1 Changes Status
4 Fan 2 Changes Status
5 All Appliances On
6 All Appliances Off


This Home Automation Kit is built using AVR ATmega16 Microcontroller, Quad Realy Driver, Home Appliances Kit(2 Bulbs and 2 fans), RS-232 Drive, USB to Serial Cable and a 433MHz RF. The Password Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II Project Kit has a range of 30m.

Upon purchase, the buyer will  receive a complete working project kit of Password Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II Project Kit. The ATmega16 Microcontroller of this kit is preprogrammed with thePassword Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II code and all the interconnections are made before shipping the project kit. The package contains following materials:-

Hardwares

  • AVR Trainer Board with ATmega16-1pc
  • Quad Relay Driver-1pc
  • RS-232 Driver-1pc
  • 433MHz RF Transmitter & Receiver Board-1pc
  • Power Supply Board-1pc
  • 1 to 1 Connector-Female to Female-8pc
  • 10 to 10 FRC Female to Female Connector-1pc
  • USB to Serial Converter-1pc
  • Nuts and Bolts

Project Codes, Hex Files, Circuit Diagrams & Connection Guides

  • Password Protected Relay based PC Controlled Wireless Home Automation System with ATmega16 using 433MHz RF-II
  • 433MHz RF Interfacing with ATmega16
  • Relay Interfacing with ATmega16
  • ATmega16 to PC Communication with LED Display
  • PC to ATmega16 Communication with LED Display
  • Full Duplex Communication between PC and ATmega16 with LED Display
  • ATmega16 to PC Communication with LCD Display
  • PC to ATmega16 Communication with LCD Display
  • Full Duplex Communication between PC and ATmega16 with LCD Display
  • 16X2 Alphanumeric LCD Interfacing with ATmega16
  • Horizontal Scrolling in 16X2 Alphanumeric LCD with ATmega16
  • Vertical Scrolling in 16X2 Alphanumeric LCD with ATmega16
  • Buzzer Interfacing with ATmega16
  • LED Interfacing with ATmega16
  • LED Blinking with ATmega16
  • LED Pattern 1 with ATmega16
  • LED Pattern 2 with ATmega16
  • LED Pattern 3 with ATmega16
  • LED Pattern 4 with ATmega16
  • LED Pattern 5 with ATmega16
  • LED Pattern 6 with ATmega16
  • LED Pattern 7 with ATmega16
  • LED Pattern 8 with ATmega16
  • LED Dancing with ATmega16

Softwares, Installation Guides, User Guides

  • Atmel Studio 6
  • SinaProg
  • USBasp driver(for Window XP, Vista , 7 and 8)
  • Bluetooth Termonal App

There are no reviews yet.

Related Products

Popular Products