Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF Project Kit

Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF Project Kit is a kind of Wireless Home Automation Kit where different home appliances like Bulb, Fan, TV and others are controlled wirelessly through different hand gestures using Accelerometer Sensor and 433MHz RF. The Accelerometer Sensor is a MEMS sensor used to detect different static and Dynamic Acceleration parameters. Here, it is used to detect tilt of hand. And 433MHz RF is a wireless transmitter-receiver pair used to transfer data between two system in single direction only. For controlling different home appliances, her we are using relay.

The home appliances can be controlled wirelessly by posing predefined Hand Gestures using accelerometer sensor. Here, we will control 4 appliances, two Bulbs and two Fans. For each home appliances, one predefined Hand Gesture is used. Each time the predefined Hand Gesture of an appliance is posed, the status of that appliance changes from On to Off and Off to On. Any changes in the status of any of the 4 appliances are displayed in a 16X2 alphanumeric LCD. The control Hand Gestures for 4 appliances are shown below:-

Control Hand Gestures Robot Movement
Forward Tilt Bulb 1 Changes Status
Backward Tilt Bulb 2 Changes Status
Left Tilt Fan 1 Changes Status
Right Tilt Fan 2 Changes Status
No Tilt No Changes


This Home Automation Kit is built using AVR ATmega16 Microcontroller, Quad Realy Driver, Accelerometer Sensor, Home Appliances Kit(2 Bulbs and 2 fans), 433MHz RF and a 16X2 Alphanumeric LCD. The ccelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF Project Kit has a range of 30m.

Upon purchase, the buyer will  receive a complete working project kit of Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF Project Kit. The ATmega16 Microcontroller of this kit is preprogrammed with the Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF code and all the interconnections are made before shipping the project kit. The package contains following materials:-

Hardwares

  • AVR Trainer Board with ATmega16-1pc
  • Quad Relay Driver-1pc
  • 3-axis Accelerometer Sensor -1pc
  • 16X2 Alphanumeric LCD-1pc
  • 433MHz RF Transmitter & Receiver Board-1pc
  • Power Supply Board-1pc
  • 1 to 1 Connector-Female to Female-11pc
  • 10 to 10 FRC Female to Female Connector-1pc
  • 5 to 5 Connector-Female to Female-1 Meter-1pc
  • Nuts and Bolts

Project Codes, Hex Files, Circuit Diagrams & Connection Guides

  • Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with ATmega16 using 433MHz RF
  • Relay Interfacing with ATmega16
  • 433MHz RF Interfacing with ATmega16
  • 3-axis Accelerometer Sensor-ADXL335 Interfacing with ATmega16
  • Analog to Digital Converter of ATmega16 with LCD Display
  • Analog to Digital Converter of ATmega16 with LED Display
  • 16X2 Alphanumeric LCD Interfacing with ATmega16
  • Horizontal Scrolling in 16X2 Alphanumeric LCD with ATmega16
  • Vertical Scrolling in 16X2 Alphanumeric LCD with ATmega16
  • Buzzer Interfacing with ATmega16
  • LED Interfacing with ATmega16
  • LED Blinking with ATmega16
  • LED Pattern 1 with ATmega16
  • LED Pattern 2 with ATmega16
  • LED Pattern 3 with ATmega16
  • LED Pattern 4 with ATmega16
  • LED Pattern 5 with ATmega16
  • LED Pattern 6 with ATmega16
  • LED Pattern 7 with ATmega16
  • LED Pattern 8 with ATmega16
  • LED Dancing with ATmega16

Softwares, Installation Guides, User Guides

  • Atmel Studio 6
  • SinaProg
  • USBasp driver(for Window XP, Vista , 7 and 8)

There are no reviews yet.

Related Products

Popular Products