LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. These modules are preferred over seven segments and other multi segment LEDs. When you start working with LCD modules you will start feeling the real power of MCU and your imaginations will be touching sky. The alphanumeric LCD that we are going to interface is a 20X4 alphanumeric LCD. It means the LCD can display 20 characters in each row and it has four rows. It is a HD44780 controller based LCD. There are two methods to interface any alphanumeric LCD with AVR ATmega16 microcontroller: 8-bit and 4-bit interfacing method. In 8-bit interfacing method, all the eight data pins of the alphanumeric LCD are used and in 4-bit interfacing method, only the upper 4 data pins (D4, D5, D6 and D7) of the alphanumeric LCD are used to send 8-bit data (or command) to the alphanumeric LCD from the microcontroller. In 8-bit method, the 8-bit data (or command) is sent at a time using the 8 data lines of the alphanumeric LCD but in 4-bit method, the 8-bit data (or command) cannot be sent at a time to the alphanumeric LCD. So, the upper 4 bits of data (or command) are sent first and the lower 4 bits are sent later.
In this project, we will learn How to interface a 20×4 alphanumeric LCD with AVR ATmega16 microcontroller using 8-bit interfacing method. Here, we will display “ABLab Solutions” in 1st row, “Bhubaneswar” in 2nd row, “www.ablab.in” in 3rd row and “info@ablab.in” in 4th row of the 20X4 alphanumeric LCD.
The step-by-step connection guide for 20X4 Alphanumeric LCD Interfacing with ATmega16 is as follows
Steps - 1 ( 0f 8 )
Insert the DC Pin of 12V, 1A DC Adapter to the DC Socket of AVR Trainer Board-100.
Steps - 2 ( 0f 8 )
Connect PortB header with LCD data header in AVR Trainer Board-100 with a 10 to 10 FRC Female Connector.
Steps - 3 ( 0f 8 )
Connect RS, RW & EN pins of LCD control header with PD0, PD1 & PD2 pins of PortD header respectively in AVR Trainer Board-100 with 1 to 1 Connectors.
Steps - 4 ( 0f 8 )
Connect the 20X4 Alphanumeric LCD to the LCD header of AVR Trainer Board-100 with 1 to 1 Connectors.
Steps - 5 ( 0f 8 )
Connect the ISP header of AVR Trainer Board-100 with AVR USB Programmer header of AVR USB Programmer with a 10 to 10 FRC Female Connector.
Steps - 6 ( 0f 8 )
Connect the AVR USB Programmer to the PC/Laptop's USB Port directly or with the help of USB AM-FM Cable.
Steps - 7 ( 0f 8 )
Switch on the power with the help of Power Switch of AVR Trainer Board-100.
Steps - 8 ( 0f 8 )
Download the 20X4 Alphanumeric LCD Interfacing with ATmega16 Hex file to AVR Trainer Board-100 with the help of SinaProg Hex downloader and AVR USB Programmer.
Insert the DC Pin of 12V, 1A DC Adapter to the DC Socket of AVR Trainer Board-100.
Steps - 1 ( 0f 8 )
Connect PortB header with LCD data header in AVR Trainer Board-100 with a 10 to 10 FRC Female Connector.
Steps - 2 ( 0f 8 )
Connect RS, RW & EN pins of LCD control header with PD0, PD1 & PD2 pins of PortD header respectively in AVR Trainer Board-100 with 1 to 1 Connectors.
Steps - 3 ( 0f 8 )
Connect the 20X4 Alphanumeric LCD to the LCD header of AVR Trainer Board-100 with 1 to 1 Connectors.
Steps - 4 ( 0f 8 )
Connect the ISP header of AVR Trainer Board-100 with AVR USB Programmer header of AVR USB Programmer with a 10 to 10 FRC Female Connector.
Steps - 5 ( 0f 8 )
Connect the AVR USB Programmer to the PC/Laptop's USB Port directly or with the help of USB AM-FM Cable.
Steps - 6 ( 0f 8 )
Switch on the power with the help of Power Switch of AVR Trainer Board-100.
Steps - 7 ( 0f 8 )
Download the 20X4 Alphanumeric LCD Interfacing with ATmega16 Hex file to AVR Trainer Board-100 with the help of SinaProg Hex downloader and AVR USB Programmer.
Steps - 8 ( 0f 8 )
Downloads
20X4 Alphanumeric LCD Interfacing with ATmega16 Project File
126 downloads
0
Kb
Downloads
20X4 Alphanumeric LCD Interfacing with ATmega16 Project File
126 downloads
0
Kb
Post a Comment
chauhankeyur
not downloaded .. not proper solution.. waste of time
Post a Comment